CHIEFTAIN / CHIEFTAIN DARK HORSE / ROAD MASTER (7" & 4.5")


YES. Our 7" Headlight and 4.5" passing lights are plug-n-play. The headlight is simple as you only need to remove the front trim piece to access the mounting bracket. The passing lights take more time as you need to take apart the inner fairing to access their mounting brackets.

Here is the video to the installation of our 7 inch on the Indian Chieftain. Hope this helps!  

https://www.youtube.com/watch?v=qPEIcgiMXxk



CHIEF / CHIEF DARK HORSE / SPRINGFIELD (7" & 4.5")


YES. Our 7" Headlight and 4.5" passing lights are plug-n-play. The passing lights are simple, just remove the front trim ring, plug in our light, and seal it back up. The headlight is not too difficult, simply remove the front nacelle. There are for screws accessible from the back of the nacelle, turn the bars and reach in to access each one. Once the nacelle is detached the old headlight can be removed and our light mounts identically and plugs into the factory harness.


SCOUT / SCOUT 60 (5-3/4")


YES. Remove the trim ring with the old light attached via 4 spring clips on the back of the light. Remove the sprint clips and place our light into the trim ring. Re-insert the spring clips to hold the light into position, plug our light into the factory harness and re-attach the assembly.


SCOUT BOBBER (5-3/4")


NO. The headlight housing has a shallow support dish behind the light, the larger LED assembly will not fit properly.